Sears 4 Cubic Feet Mixing Drum Cement Mixer

　　Model #

　　/ Ser # D - 4334 (Used / As is)

　　- Good Overall Condition

　　- Approx 120lbs

　　- 115V AC 1-1/2 Horse

　　- 3pronge plug

　　- Not built for towing

　　Send me a note,

　　will respond promptly...

　　Thanks For Viewing!

　　DETAILS FROM ONLINE MANUAL:

　　Can mix up to 250 Pounds (three 80 pound bags or four 60 pounds)

　　of concrete / cement or/and stucco or whatever is needed for mixing.

　　Yes, while gears are moving during operation, the grinding noise will

　　increase more and more (up to the sound of rubber mallets gently beating up against drywall if filled up to 250 pounds) as weight of mortar/concrete/other is being poured into the drum.

　　This is normal for the 115V AC, 1-1/2 Horse, Single phase, 1,725 r.p.m.

　　The whole steel framing is grounded (for safety) due to its 6" long electric cord having three prongs (Neutral, Hot and ground).

　　(Drum can be completely rotated up-side-down to easily spray

　　water up inside to rinse drum quickly).

　　Frame is steel construction connected together with hex-nut screws, washers and bolts with some welding.

　　The motor, pulleys, belts, internal drive shafts are encased

　　in a 1/8" thick plastic covering with " vent holes to air out

　　the motor's heat.

　　The volume inside the drum holds up to 4 cubic feet / 30 wet gallons

　　of space.

　　The inside diameter of pouring spout is 14" diameter.

　　The maximum outside girth size (centered at the rotation gear) is 23"

　　diameter & 72.26" / 6' circumference.

　　The length (from the spout opening to where the drum axle is welded to the rear of the drum)

　　is of the drum itself is 25" long.

　　Drum rotates up to 21.05 R.P.M (1,263.0 R.P.H) when completely empty at 0 pounds).

　　Drum rotates up to 20.15 R.P.M (1,209 R.P.H) when filled up to 125 pounds.

　　Drum rotates up to 18.75 R.P.M (1,125 R.P.H) when filled up to 250 pounds.

　　The both heavy-duty plastic wheels are 10" Diameter X 1-3/4" wide

　　and are made out of polyethylene tires.

　　Not built for towing.

　　Maximum machine dimensions (for pick-up & loading)

　　Height is 55 - 5/8" high at the edge of the black rubber handle

　　(when drum is facing straight up).

　　Width is 32 - 1/4" wide at the edges of the axel caps on the both wheels.

　　Length is 42 -- " long (from the back edge of the wheel to the pivot

　　knob connected to the rotation handle).

　　==============================================