USED EXELTECH POWER INVERTER - Model: XP600

　　This unit came with a trailer load of equipment I bought. I know nothing about it and have no idea how to check it out. I'm not sure I understand what it is designed to do. You are welcome to come to my home and try it out yourself, but I am selling it in its current condition, whatever that is. I saw these units selling for as high as $750 on line.

　　I will take $50 for a quick, cash sale!

　　Ask for Roy at (479)

　　The inernet says: These inverters can supply twice their rated output power for 3 seconds, in order to start motors or supply in-rush currents to electronic loads. If output power is exceeded for greater than 3 seconds, output voltage is reduced to a level which will provide the inverter's rated power to the load by clipping tops of the waveform. The inverter can operate safely in this mode indefinitely. Should the overload condition clear, the inverter will again provide the cleanest Sine Wave in the industry. This over-current circuitry insures maximum peak current does not exceed 300% of rated RMS current. Should this number be exceeded, it will again reduce output voltage as required to maintain that limit.

　　Temperature: -25 to 30C full power derated above 30 C

　　Humidity: 5% to 95% non condensing

　　Altitude: -200 to 10k feet full power, derated above 10k

　　Audible Noise: Less than 45 dbA

　　Cooling: 600W & 1100W Thermo- statically controlled forced air. 125W & 250W convection cooled.

　　Finish: Painted aluminum

　　Case size: 7.70" x 3.60" x 11.77"

　　Weight: 6.5 lbs

　　The spec plate on this unit says:

　　Exeltech

　　7317 Jack Newell Blvd North

　　Fort Worth, Texas 76

　　Manufactured in the USA in: February 2004

　　XP6-1-4-6-1 (194091)

　　DC 48V (Sys): 14.3 A @ 55.2V (Nom)

　　AC 117V 5.13 A 60Hz

　　UL listed QQGQ Power Supply - 3S31