This is a custom built darkroom sink with a long superficial section that can hold 16x20 trays and has a deep well area with overflow channel. Sink is six foot but overall lengh has to do with seven feet. It was made use of really little and if dusted off will look ready and practically new for its very first coat of paint or stain as desired. The wood cabinet was cut in half to fit into an elevator and can merely be pushed together and attached or simply left loose if preferred. It is revealed rived somewhat with a close up of it rived further. The sink is one piece formed made by Delta and I might have some plumbing for this too. The expense to build was well over 1000.00 + 500. for the sink + 100 for the plumbing and fixtures. I want to get 500.00 for all of it. I also have a matching custom-made made Jobo processor cabinet for sale. Phone calls or text only please. 814- 462- # 51 % & 78 THANKS The print clothes dryer sitting in the shallow side is not part of this sale. If this number does not work then try 814-46 % 2-51 & 78 thanks!