Riken Keiki GX-3R Portable Gas Monitor
Overview
This chapter briefly describes the GX-3R gas monitor. This chapter also describes the
GX-3R Operator’s Manual . Table 1 at the end of this chapter lists the
specifications for the GX-3R.
Email:[email protected]
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com
About the GX-3R
Using an advanced detection system consisting of up to three gas sensors, the GX-3R
personal four-gas monitor detects the presence of combustible gas, oxygen (O2), carbon
monoxide (CO), and hydrogen sulfide (H2S) simultaneously. The GX-3R’s compact size
and easy-to-use design makes it ideally suited for a wide range of applications, including
sewage treatment plants, utility manholes, tunnels, hazardous waste sites, power stations,
petrochemical refineries, mines, paper mills, drilling rigs, and fire fighting stations. The
GX-3R offers a full range of features, including:
• Simultaneous monitoring of one to four gases
• Liquid crystal display (LCD) for complete and understandable information at a glance
• Ultrabright alarm LEDs
• Distinctive audible/vibrating alarms for dangerous gas conditions and audible alarms
for unit malfunction
• Microprocessor control for reliability, ease of use, and advanced capabilities
• Data logging functions
• Alarm trend data
• STEL, TWA, and over range alarms
• Peak readings
• Built-in time function
• Lunch break feature
Category Portable gas detector
Type Multi gas
Target gas LEL/O2/CO/H2S
Detection range 0~100%LEL(HC/CH4)
0~40vol%(O2)
0~2000ppm(CO)
0~200ppm(H2S)
Sampling method Diffusion
Type of alarm Gas alarms, Fault alarms
Display of alarm Flashing light, buzzer, vibration
Explosion proof Intrinsically safe
Ingress proof rating IP66/68
Approvals ATEX, IECEx
Power source Direct charging Ni-MH battery pack
(Can be fast charged in just 180min)
Continuous operation Approx. 40 hours after full charge
(with long battery mode)
Dimensions & Weight Approx. 58(W) x 65(H) x 26(D) mm
Approx. 100g
Operating temperature & Humidity -40℃ to 60℃, (-40 to 140F)
Features
Smallest & lightest 4 gas monitor
Simultaneous detection of LEL, O2, H2S, & CO
H2 Compensated CO sensor available
Simple 2-button operation
Audible, visual, & vibration alarms with 3 user adjustable levels
25 hours of operation with lithium-ion battery
Water and dust resistant design (IP66/68)
Non-compliance indicator for calibration and testing adherence
Dual-filament LEL sensor for enhanced resistance to silicone poisoning
Electrochemical O2 sensor with 3 to 5-year lifespan
Combo micro sensor for H2S and CO detection
± 5% accuracy for precise readings
Digital LCD display for easy monitoring
Accessories include clip-on sampling pump and calibration station
Three-year warranty for peace of mind
Please contact me get more information
Email:[email protected]
VK/Whatsapp/Telegram:+8613667120925
Website: www.cwlyautomation.com
81-GX3RCO Calibration kit: 103 liter 3-gas (CH4/O2/CO) cylinder, 0.25 LPM regulator, calibration
tubing, and case
81-GX3RCO-LV Calibration kit: 34 liter steel 3-gas (CH4/O2/ CO) cylinder, 0.25 LPM regulator,
calibration tubing, and case
81-GX3RHSCO Calibration kit: 58 liter 4-gas (CH4/O2/ H2S/CO) cylinder, 0.25 LPM regulator,
calibration tubing, and case
81-GX3RHSCO-LV Calibration kit: 34 liter aluminum 4-gas (CH4/O2/ H2S/CO) cylinder, 0.25 LPM
regulator, calibration tubing, and case
81-GX3RHSCO-116 Calibration kit: 116 liter aluminum 4-gas (CH4/O2/ H2S/CO), 0.25 LPM regulator,
calibration tubing, and case
ESR-A13i Hydrogen sulfide (H2S) sensor
ESR-A13P Carbon monoxide (CO) sensor
ESR-A1CP Hydrogen-compensated carbon monoxide (CO) sensor
ESR-A1DP Dual carbon monoxide (CO) and hydrogen sulfide (H2S) sensor
ESR-X13P Oxygen sensor
NCR-6309 Combustible gas sensor, catalytic
Map location: 72390, West Helena, Phillips, Arkansas, USA