MEGGER Megohmmeter Attn: Electricians ? General Contractors ? Solar Installers AC and Battery Megohmmeter, Output Test Voltage /2VDC, Insulation Resistance Range 10K to 15T Ohms MEGGER MIT520/2 Built-in timer and signal which automatically performs the Dielectric Absorption Ratio Test. * Response time of less than 5 seconds. * Sampling rate of no less than 2 times/second. * Safety leads with screw-on alligator clips. * Powered by 6 "AA" batteries. * Low battery indication. * Manual or automatic operation. * Audible and visual indication in the auto mode. * Auto shut-off after 3 minutes. Dielectric Absorption Ratio test only. SPECIFICATIONS: Ranges DC Test Voltages Range Accuracy 0-200ohm 3VDC +/- 1% of reading +/- 2 LSD 0-200Mohms 250VDC+/-12.5VDC +/- 3% of reading +/- 2 LSD 0-200Mohms 500VDC+/-25VDC +/- 3% of reading +/- 2 LSD 0-2000Mohms 1000VDC+/-50VDC 0-1000Mohm +/-3% of reading =/-2 LSD 1000Mohm-2000Mohm +/-3.5% of reading =/- 2 LSD Display: 3 1/2 LCD Response Time: Less than 5 seconds Sampling Rate: Minimum of 2 times per second. Power Supply: 6 "AA" batteries, not supplied with unit. Current Drain: 65ma max. on Megohm; 17mA max. on Ohm Low Battery Indication: "BAT" Visual Indication: Arrow pointing up in data hold mode. Audible Indication: 1 beep per second while instrument in data hold mode . Operating Temp/Relative Humidity: 32 degrees F to 140 degrees F 80% RH Storage Temp/Relative Humidity: 20 degrees F to 140 degrees F 80% RH Size: 4.25" x 6" x 3.5" (10.79cm x 15cm x 8.89 cm) Weight: 14.9 oz. (422g) without batteries Resolution: 200 ohms 0.1 ohm 200Mohms 0.1 Mohms 2000Mohms 1.0 Mohms Max. Current: 200Mohms (250V) 0.42ma 200Mohms (500V) 0.82ma 2000Mohms (1000V) 1.2ma Supplied complete with carrying case, test leads with alligator clips, and instruction book. GUARANTEE: One year factory replacement for defects in material and workmanship. I GOT THIS 3 YEARS AGO FOR $3900.00 USED IT TWO TIMES.

　　WILL LET IT GO FOR $1,000.00