AUDIO-JP supports for Japan.

　　S.I.T-7000 is a high performance stereo power amplifier using the SIT elements, which have a rumor "good sound by its triode

　　characteristics"

　　It's true that the in/out characteristics of the SIT and a triode (like 845) are astonishingly resembles, but It is only a

　　rumor! No one knows whether the triode characteristics has anything to do with a good sound. So first, we were much skeptical

　　about it, but once we've tested the SIT element we were amazed by its high potential afresh, and it led us to the development

　　of this amplifier.

　　One of SIT's amazing point is, that the sound become suddenly clear just by replacing power MOS-FET or bipolar TR to SIT

　　element! Next we found, the small SIT also shows a great performance for voltage amplification, better than a junction FET.

　　So we decided to built all the main signal pass only by SIT units (except the peripheral part). Major feature of SIT element

　　may be "difficult to cut off" because of its smooth in/out characteristics, and wider A class operating range compared with

　　the idling current. The heat-sinks will become slightly warm with this SIT, although operating in class A mode up to about

　　30W. In addition, the crossover distortion, over class A range, is quite small by its high-speed switching characteristic. We

　　utilize many skeleton (non-coated) resistors and capacitors, unique parts made by our factory. (refer to the photos) The

　　merit of skeleton parts is sound clarity, not like other's parts coated by epoxy or other plastics. To reduce the turbidity

　　thoroughly, the rind of all electrolytic capacitors are peeled from the body. The signal in/out are direct gold-plated RCA

　　connectors and SP Terminals. And for all the wiring, 7nine pure copper with handmade cotton exterior is used. Next, the sound

　　of an amplifier is greatly affected by its case-material, so we selected a wood board, which has better sound quality than

　　metals, for under and upper panel.