DIRECTV SWM SL3S LNB Kit with Power and Splitter

　　Product Features:

　　This kit includes a SWM LNB "Single Wire Multiswitch" for a Slimline Dish.

　　I comes with its required power supply

　　This SWM kit also comes with the DIRECTV 8 Way Wide Band Switch

　　All hardware necessary to do the conversion.

　　To be used to pick up high definition local channel programming from DIRECTV

　　The SL5S SWM LNB is designed with an built-in 8-channel Multiswitch which allows you to have multiple satellite feeds at once.

　　Manufacturers may vary. All components are DIRECTV approved manufacturers.

　　One outputs carrying satellite signal from all Five satellites in the sky

　　Capable of receiving DIRECTV satellite signals on the Ku band (101, 110, 119) and Ka band (99, 103)

　　LNB Arm Not Included

　　This is the SWM Power Suply

　　The PI-21 Power Inserter is designed for use on the SWiMLine dish.

　　Frequency Range: 2-2150Mhz

　　Can be used for the SWM-8

　　UL Listed

　　Output: 21v/ 1.2A max/ 25.2W max.

　　Input 100~120Vac/ 60Hz/ 0.6A max/ 30W max

　　Insertion loss 1.5db typ.

　　4-way Wide Band Satellite Splitter, One Port DC Path (Indoor/Outdoor)

　　500mA DC passing from any output to input

　　Diode steered protection

　　Grounding port provided

　　High isolation between outputs

　　Images and Manufacturers may vary - all parts are DIRECTV SWM Approved. SWS8WB

　　All our products have been checked and packaged in good condition before sending them. If the items you received is defective, please inform us,we will try our best to give you the best reply. If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact us before you return it. If you want send the item back to us,you have to pay for the return cost and we pay the cost for reshipping.