The new Swift Trawler 48 advances the BENETEAU Range of practical and seaworthy passagemakers. The Andreani design focuses on easy living and circulation that builds on the wealth of Beneteau Trawler DNA and customer feedback. The Swift Trawler 48 is 48’4” long overall with a beam of 14’9” and is now positioned as the largest Swift Trawler in the Range only surpassed by the Grand Trawler as the flagship of the BENETEAU trawler range.
• Sandwich (Polyester resin infusion - fiberglass)
• White gelcoat 9010
• Structural hull counter molding in monolithic laminate (Polyester resin infusion - fiberglass)
Profile:
• Semi-planing hull
DECK
• Sandwich (Polyester resin infusion - fiberglass / balsa core)
• Structural counter molding in monolithic laminate (polyester resin -fiberglass)
• White gelcoat 9010
• Diamond tip type non-slip surface
• Teak deck, black joints
• Marlin Brilliant White PVC interior upholstery
• Anthracite pilot seat
• Marlin Brilliant White PVC Exterior upholstery
• Double stainless steel bow fitting
• 2 000 W Vertical electric windlass, up / down and remote control from the windlass, wheelhouse and flybridge
• 10 Aluminum mooring cleats (L 400 mm / 15 - .’’)
• Stainless steel gunwale guards
• 2 Compartments equipped with self-bailers and polyester hoods
SAFETY ON DECK
• Stainless steel pulpit, open and surrounding cockpit up to steps
• Leather covered stainless steel handrails, in the cockpit
COCKPIT
• Self-bailing cockpit
• 2 Lockers in cockpit bottom gas piston assisted and lockable
• Gas cylinder locker integrated into the cockpit aft bench
• Cockpit shower hot/cold water
• Double port cockpit access door
• Swimming platform with rubbing strake (4 x 1,4 m / 13’1’’ x 4’7’’)
• Ergonomic bathing ladder with hand holds in the swim platform
• 1 PMMA access door at the starboard side deck from the cockpit
• Emergency ladder
• 4 Cup holders
FLYBRIDGE
• Flying bridge self-bailing
• Retractable stainless steel ladder with double access ramp to the flybridge with solid wood treads
• Grey tinted windscreen in PMMA
• Access by polyester hatch
• Stainless steel pulpit surrounding aft of flybridge
• Polyester mast for mounting navigation lights, radar and aerials
• Central steering console
• Control panel including: Electrical engine controls, Electric windlass control, Thruster and Trim tab
• Gauges indicators
• Rudder angle indicator
• Space for navigation electronics
• Steering wheel stainless steel
• Steering compass
• Hydraulic steering
• Fog horn
• USB socket
• 1 Adjustable pilot seat and 3 places for co-pilot with convertible backrest
• Flybridge face-to-face salon with 2 bench seats in an L shape, with integrated stowage and an extendable solid wood table
• GRP unit with sink, handrail and stowage
• Space for life raft with stainless steel fixing bolt plates
• Set of flybridge covers (console + bench seating + table)
• 6 Cup holders
• Shaft propulsion
• Four-blade propellers
• Cummins QSB 6,7L engine 2 x 425HP (2 x 313Kw) + Joystick
• Fuel filters
• Sea water filters
• Engine room soundproofed with high density foam (40mm thick)
• Air intake for cooling the engine compartment on the port hull plating
• 1 Extinguisher
• Double fuel tank filling cap
• 2 Aluminum fuel tanks (Capacity = 2 x 965 L / 2 x 255 US Gal) inter connected and pre-fitted for FPS (Fuel Polishing System) connection system
STEERING SYSTEM
- 2 Rudders stainless steel
- Hydraulic steering
- Electric trim tabs
• Electrical panel (12 V / 110 V)
• Shore power socket (110 V)
• 12 110V Sockets: 2 in the salon, 2 in galley, 2 in owner's cabin, 1 in the VIP cabin, 1 in the 3rd cabin, 1 in the owner head, 1 in the 2nd head),+ 2 for TV (Salon + Owner's cabin)
• 12 USB sockets: 2 in the salon, 2 in steering station, 4 in owner's cabin, 2 in the VIP cabin, 2 in the 3rd cabin
• 2 double antenna sockets (TNT - SAT)
• 4 12V 140Ah service batteries (AGM)
• 4 12V 50Ah engine start batteries
• 4 12V 50Ah bow thruster batteries
• 2 Battery chargers 25 Ah
• Generator (7,5 KVA - 110 V / 50 Hz) + COCON
• 1 12 V Power outlet
• Outside and inside lighting
• LED indirect lighting
• Outside lighting
• 2 Automatic electric bilge pumps
• Shore freshwater supply
• Pump for deck washing
• Water unit for pressurizing the hot / cold water circuit with accumulator tank
• 40 L / 11 US Gal Water heater working off engine exchanger and 110 V
• Water tank filler
• 2 Rotomolded water tanks (2 x 320 L / 2 x 85 US Gal)
• Drainage outlet for black water holding tank
• For monitoring the boat's status and receiving alerts as well as maintenance advice via the associated mobile applicatio.
• The type of information collected (GPS position, batteries, engine info, navigation data, etc.) varies according to the boat's configuration.
General information
Make/model | Beneteau Swift Trawler |
Category | New power boat for sale |
Price | £851,591 GBP | Listed price $1,100,000 USD |
Name of boat | Our Inventory |
Year | 2024 |
Length overall | 14.73 metres |
Location | Seattle, Washington, United States |