60th anniversary limited-edition turntable clearly demonstrates the purity of analog audio.Features:Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPMAT-VM95 cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application30 mm-thick chassis made from low-resonance, high-density clear acrylicMotor features a speed-sensor system to maintain accurate platter rotation speedTransparent acrylic platter for stable rotationExclusively designed high-isolation, height-adjustable feetCarbon-fiber tonearm with metal tonearm lift and base, and VTA (vertical tracking angle) adjustmentAdjustable dynamic anti-skate controlLightweight AT-HS4SV headshellIncludes a 0.3 x 0.7 mil elliptical stylus, plus a limited-edition, clear-body Shibata stylusAC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chainIncludes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, and removable hinged dust coverThis VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.Cartridge:VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylusAluminum cantileverDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusTechnical SpecificationsFrequency Response 20-25,000 HzChannel Separation 23 (dB at 1 kHz)Vertical Tracking Angle 23°Vertical Tracking Force 1.8-2.2 g (2.0 g standard)Stylus Construction Nude square shankRecommended Load Impedance 47,000 ohmsCoil Impedance 3.3 k ohms (1 kHz)DC Resistance 485 ohmsCoil Inductance 550 mH (1 kHz)Recommended load capacitance 100 to 200 pFOutput 3.5 mV (1 kHz, 5 cm/sec.)Channel Balance 1.5 dB (1 kHz)Stylus Shape 2.7 x 0.26 mil ShibataCantilever Aluminum pipeMount Half-inchWeight 6.1 g (0.22 oz)Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") DReplacement Stylus AT-VMN95SHAccessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver