J&K Engines

　　3125 North, Mount Juliet Rd.

　　Mount Juliet TN. 37122

　　Office

　　Fax

　　___________________________

　　THE ASSEMBLY:

　　ALL PARTS AND INTERNALS ARE BRAND NEW

　　. All oil galleys and passages are blasted out and brushed clean, and then all new freeze plugs and cam bearings are installed.

　　.Crankshaft is measured and polished, then new rod bearings and main bearings installed, the cam is measured and polished as well.

　　. New BLACK ONYX revised head gaskets are installed.

　　. All the factory torque to yield cylinder head bolts are replaced with ARP head studs (a 500.00 value) and then properly torqued.

　　. Long block is assembled and powder-coated, and new rocker arms, roller lifters, and push rods are installed.

　　Call

　　for any questions. Thank You

　　. Complete disassembly:

　　. Full cleaning process, block is baked at 650 degrees for11 hrs, then jet washed and powder coated.

　　. Cylinder heads are jet washed and powder coated.

　　. Cylinder heads are resurfaced (milled) on a CNC machine.

　　. Both cylinder heads and block get pressure checked, then magne-fluxed to check for any imperfections.

　　. Complete valve job.

　　. Block is measured, if out of spec we then bore to .020 and install new pistons and rings.

　　. After bored the block is power honed to match rings.

　　Call

　　for any questions. Thank You

　　. Warranty is 1 year with unlimited mileage.

　　Location: Pueblo

　　it's ok to contact this poster with services or other commercial interests