All this is for 331. Two BLOCKS C and C53-1462 with main caps. The blocks have been cleaned, decked, pre burnt out.0265 and will certainly need finish sharpened to fit brand-new pistons, brand-new brass soft plugs set up. Both of them are totally dismantled. I will certainly connect some photos. One of the blocks has a freeze fracture on both sides that will certainly have to be bonded. It is in a location that has no stress and will not impact it at all. These were long bell housing blocks. They were machined off and adapters put on to make them short housings with a conventional hemi pattern. If you have checked out the book "The Complete Hemi" by Tex Smith, they have an article about reconstructing hemi's at Troy's factory in Rigby Id. They also reveal the adapters that Troy's placed on. Great article reveals the total reconstruct. The work done on these was done at Troy's. Only the blocks have actually had any work done on them. 2 cranks, 2 sets rods + extras, 4 heads, 4 rockers, (I soaked these in solvent and they all move complimentary) 1 front cover, 2 core cams (you can have these reground), 3 oil pumps, head bolts, 1 oil pan (needs repair), 2 valley coverings, 1 water pump, roadway draft vent tubes, 3 fuel pump eccentrics, 2 exhaust manifolds, 2 suppliers (could be able to make 1), 1 crank wheel and damper, I am cleaning shop and will give you all the 331 stuff I have. The photos just reveal one block, however the other block looks the same. $1100.00.

　　show contact information.