Selling my Sea Ray 400DB with 2 bathroom and 2 room lay out. New Jersey clean title in my name. Under 900 hours on twin Caterpillar 3116 that run great. Engines last ran a few months ago before being winterized. Both Engines show to have new top ends likely done by previous owner. Engines on boat are worth asking price. I have another project and no time to finish this one so I decided to prioritize my new project. Ive done most of the not so fun work leaving the finish work to bring it over the finish line. Boat had smoke and some fire damage in the FWD state room bed. The smoke spread thru the entire boat. Most of it has been cleaned up but there is still more to clean up. During the repair process found stringers to have bad section so had them redone with Epoxy over composite core material material making the boat stronger then when the boat was new. I project to have under 200 hours to finish the project with subbing out the wash and wax of the exterior and some of the clean up work. If you are not familiar with this type of work this is probably not the boat for you. I left the tabs to the original bed to make it simpler to build the new one. I have the overhead hutches and bolsters which will need to be covered in wood laminate or vinyl. The last picture shows what the state room should look like when completed.Ill provide a spread sheet with the materials list of what is left to finish which I estimate to be around 5k in materials and I will include the material and parts I have already purchased. The main component missing is the wood laminate rolls which I found a vender RestorationMarine that sells it by the roll with identical color but superior product when compared to the original. Most of the work is needed in the master FWD state and master bath. I left the hall way floor loose to make it easier to run the new water lines before sealing them. Was in the process of cleaning out the master bath smoke damage and running new pex water hoses to the sump and update the fixtures. Next would be Finish striping the old head liner in the master state, installing new headliner, closets and bed frame in the master state. I have all of the original overhead trim and hutch which will need to be recovered in wood laminate or vinyl. Will provide you with pictures and original build diagram from Sea Ray for the FWD bed. Diesel boats like this go in the 150k range and higher with many more hours on the boat and engines. There is plenty of room to build this with newer appliances and navigation at this price point. This is a 44 overall length with great lay out for entertaining, spacious fly bridge, 8KW generator, 3 range stove with windlass and large swim deck capable of holding a dinghy.  Work Completed:- New bottom undercoat.- New Starters- New FWD Stringers in composite and EpoxyParts and Material Included- Fly Bridge Top canvas and sides. New Never Installed.-2 Yards of Sea Ray Off White Vinyl Foam Liner- Gold Vinmar Outlet covers-Light switches- LED overhead lights- Gas Shocks for ports and Hatches- Hi Flo Bilge Pump- Port Light Glass for FWD State- Poly-carbon Mirror for FWD State-1 1/2 inch sanitation hose 19' for both heads-1/2 PEX Water lines- Vinyl Spray Paint for Cushions- 2 Gallons of Epoxy- 10 yards of 1708 Fiberglass- 2 Gallons of Epoxy Bilge Paint- 1.5 Gallons of Dewaxer thinner- Shower Sump- Sea Tech 1/2 PEX water Elbow’s- New Batteries installed 2022.

　　Remaining Work Break Down by Hours/Days

　　Bilge, Days 1-2

　　Sand and Strip FWD State- 3Hrs

　　Remove Old hoses and clamps- 1Hrs

　　Strip Master Bath and TAC- 3Hrs

　　Sand and TAC rest of Bilge- 2Hrs

　　Total 9Hours

　　Bathroom, Days 3-4

　　Paint remaining bilge area and dry over night- 2Hrs

　　Bath- Roll with Non Wax Gelcoat- 2Hrs

　　Repair Imperfections- 2Hrs

　　Roll with Wax Gelcoat- 2Hrs

　　Total 8Hrs

　　Hall Way, Day 5-6

　　Install Head Fixtures and Mirrors-2hrs

　　Install Bilge water lines and Pump- 3Hrs

　　Run new Power Wires and LUM Bilge- 1Hrs

　　Install new Shower drain assembly- 1Hrs

　　Run new Pex Water Lines and Septic- 2Hrs

　　Cut out Port Holes Floor- 4hrs

　　Reinstall FWD Floors Permenant- 4Hrs

　　                                                Total

　　17 Hours

　　FWD State, Days 7-9

　　Install FWD Headliner- 3Hrs

　　Install Side Vinyl- 2Hrs

　　Recover Side Bolsters- 3Hrs

　　Prep and Install Closets- 4Hrs

　　Laminate Doors- 4Hrs

　　Laminate Closets- 4hrs

　　Install Mirror FWD- 1hrs

　　Install HVAC unit and Duct- 3hrs

　　Install Pantry- 1Hrs

　　Install carpet and hallway flooring- 5Hrs

　　Total 30Hours

　　Misc, Days 10-12

　　Electric folding couch install- 1Hrs

　　Clean Galley and Kitchen- 5hrs

　　Install LED overhead Lights- 1Hrs

　　Hang 42 inch tv- 1Hrs

　　Wet Sand Bath and install Fixtures- 4Hrs

　　Service Engines-Sub

　　Repair Genset Glo Plugs- 2Hrs

　　Install Alternators- 3Hrs

　　Install Canopy- 2 Hrs

　　Wax and Wash- Sub

　　Install Port Lights- 2Hrs

　　Sliding door Curtain Relace- 1hr

　　Launder small Curtains

　　Steam Clean Interior W/ LA Awsome- Sub