Jet 22 44 plus Drum sander

Comes with spare paper, and manual

If have extension table available for £200

Can be demonstrated in person or by video call

Can be dismantled to go into an estate car.

Delivery is a possibility as I am up and down the country so please ask

I can also fix to a pallet for collection by a haulage company. I use Murray Hogg locally.

I have other stock available which is not listed so please ask if your looking for something specific

Official description below

Jet 22-44 Plus is a drum sander with automatic feeding of the workpiece with a conveyor belt. The main purpose is grinding and calibrating wood products. The rigid design with a cast-iron base and bracket provides high accuracy and repeatability, which is especially important in a production line. Since the shaft is fixed on one side, it is possible to grind the wide parts in two passes with a turn. When working with long billets, it is desirable to set the extension of the loading and unloading table (art.982202). All the necessary settings are provided: drum mounting heights (flywheel above) and feed rate (smooth with electronics). The alignment of the conveyor belt is made with special screws and is usually only required after replacement. The main consumable material is an abrasive belt 75 mm wide, it is wound on a drum, the ends are fixed in clamps. *As options, an open stand for the machine or a closed pedestal with a transport facilitating device (with wheels and brake) is available. Another mandatory addition should be a highly efficient extraction system, which not only improves working conditions but also significantly increases the life of the abrasive and the quality of grinding. A wide range of abrasive materials is presented in the catalog.

Specifications:

Consumed (output) power: 2.3 (1.3) kW

Drum rotation frequency: 1400 rpm

Sanding drum: ø127×560 mm

Sanding belt width: 75 mm

Feed speed: 0-3 m / min

The size of the conveyor belt (WxD): 560×1205 mm

Width of sanding area (in two passes): 550 (1100) mm

Workpiece thickness: 0.8-100 mm

Minimum length of workpiece: 60 mm

Diameter of extraction hose: 100 mm

Overall dimensions (LxWxH): 1050x680x600 mm

The weight: 115 kg