RR RACING 350 4T MY 2024

An all new level or performance

The RR Racing bikes represent the race-ready versions of the Enduro RR models and therefore differ from them with a series of modifications to the engine, suspension, frame and equipment, making them ideal for giving their best performance on the track. For Model Year 2024, the new features and innovations are undoubtedly high impact and consistent with the build philosophy of these models, offering everyone the ability to make the most of the available performance with minimal effort, so they can always give their best. Let's therefore take a look at all the new features and characteristics which set the models apart.

Frame: all new RR Racing My 2024 models, (excluding the 125 and 200), feature a completely new frame. The steering tube spars have a larger section than in the past (1 cm), introduced in order to provide greater rigidity to the bike to reduce the overall flex. In terms of the ride, this translates into greater precision on entry into and during turns, where the greater rigidity allows the bike's trail-holding to be improved with a truer and more direct response. This main modification, already successfully used in competition by the Official Team, brings with it a series of adaptations in the supports, engine mounts and so on, introduced to support the new frame characteristics. In addition to the above modifications, the footpeg mounts and the rear brake cylinder mount have also been modified. More specifically, the footpeg mounts are now narrower at the bottom, to prevent the possibility of ground contact when riding in deep ruts. The brake cylinder mount, on the other hand, has been redesigned to house the new Nissin brake cylinder.

Nissin: the new frame is now able to house a new, higher-performance Nissin brake cylinder. This component represents an advance on the previous model and is distinguished, as well as in its outer construction, by its greater braking power combined with improved ability to modulate it (excluding the 125 and 200).

Traction Control - 4Str Range

The Traction Control, which can be disabled at any moment, is now a fundamental feature of the larger engine sizes and is therefore found on the Model Year 2024 too. Management of this system is via the usual button on the control panel between the steering tube and the fuel tank. As both the TC function and engine map selection function are controlled from this panel, it has two control buttons and two separate indicator LEDs for the two functions.

48 mm Kayaba (KYB) AOS closed cartridge fork: Anodised internal parts and the treatments administered to the materials minimise sliding friction, while adjustable compression and rebound damping let each rider find the perfect customisation of the setting. Betamotor's engineers have recalibrated the component to make it work optimally with the new frame characteristics.

Kayaba (KYB) C46 Rear Shock: The KYB shock can be seen as a gold standard in the racing scene in terms of its ability to absorb the roughness of the terrain, the level of traction transferred to the vehicle and the consistency of performance even under particularly heavy use, and its hydraulic setting can be fully customised by adjusting the external compression (both high and low speed) and rebound settings.

Quick release front axle: immediately recognisable by the red anodised alloy release lever, this component is crucial for saving precious seconds in a race when you need to change a tyre.

Reinforced handguards: the new handguards, designed and manufactured in-house by Betamotor, feature a two-component material mould, in red and blue, which not only give the bike a racing look but also makes them especially hard-wearing in even the roughest off-road use.

Ergal alloy footpegs: to ensure maximum control at all times and ensure no loss of contact with the bike, the RR Racing models are fitted with black ergal racing footpegs with steel pins, featuring a large contact surface area.

Rear sprocket with anodised aluminium core and steel toothing by ZF SPROCKETS: top-class performance, lightness and strength - the perfect mix of all the attributes any racing component must have.

Dedicated red and blue racing seat: with a non-slip top cover and document holder pocket for unparalleled grip, comfort and practicality.

Anodised black shift lever and rear brake pedal.

Gearbox oil filler cap, engine oil filler cap and oil filter cap anodised red aluminium.

Chain tensioners in red ergal alloy.

New Racing graphics and red and blue wheel decals.

⭐️Fully Built and Ready to Ride

⭐️Road Registered by Ourselves

⭐️Bikes supplied with VAT invoice

⭐️Nationwide delivery available

⭐️Part Exchange Welcome (very good prices given)

For anymore information get in touch

01483 538485

[Email address removed. Click Email button to contact us.]

[Website URL removed]

About Us:

Welcome to Gordon Farley Motorcycles. We are a family run business that has been established for over 40 years. Our aim is to provide you with a first class service that makes your motorcycle experience enjoyable and hassle free. We are involved heavily in Trials and always have been since Gordon set up his first shop after retiring from competitive trials after achieving his goal of becoming British Champion. We are dealers for Beta, Gas Gas, Sherco, Scorpa and now TRS motorcycles. We also stock Beta Enduro bikes which have recently become a very popular and very competitive bike! We also stock all spares, clothing and accessories for Trials + Enduro.

We also have extensive stock of new and second hand bikes and always welcome part exchanges. Although what you see is mainly off road we still and always will carry all service items for Suzuki,Yamaha,Honda,Kawasaki + European road bikes. We also sell and take in part exchange most road bikes (having been a main honda agent for numerous years) and that will never change. Also have workshop and MOT centre for all road and off road bikes.

We are renowned across the country and Europe for our extensive stock of Honda TLR Spares and also Yamaha TY 175 spares. Come take a look and hope you find exactly what you are looking for but if not drop us an e-mail or call and im sure we can help :-)

Warranty:

All new bikes are covered by a manufacturers warranty.

Terms and Conditions:

Mon-Fri 9.00 till 5.30

Sat 9.00 till 4.00

Why buy from us?

* Part Exchange Welcome

* All credit and debit cards accepted

* Workshop repairs, MOT's, clothing, sales, spares

* Established 0ver 40 years

* Open 6 days a week